Rocker Panel Trim
1 – ROCKER COVER ASSEMBLY – LEFT HAND
6005874-00-J
For vehicles built on or after July 5th, 2016. Must be used with 1024575-00-G and 1012215-00-G. For vehicles built between April 2016 and July 4th 2016, update both LH and RH side to 00-J. Must be used with 1024575-00-G, 1012215-00-G, 1025042-00-G and 1012217-00-G.
1 – ROCKER COVER ASSEMBLY – RIGHT HAND
6005875-00-J
For vehicles built on or after July 5th, 2016. Must be used with 1025042-00-G and 1012217-00-G. For vehicles built between April 2016 and July 4th 2016, update both LH and RH side to 00-J. Must be used with 1024575-00-G, 1012215-00-G, 1025042-00-G and 1012217-00-G
2 – U – NUT M6X0.6 – 3.5
1006518-00-A
Order in quantities of 50; minimum order: 50.
3 – U – NUT – M6 1 – 3.5 TO 4.5 THICK
1010416-00-B
4 – RVT PUSH-PULL 8X18X20.0 (0M1M) POM – FOR INNER AND OUTER B-COVER
1006521-00-A
5 – BRIGHT MOULDING – SILL LEFT – PLASTIC
1024575-00-G
Needs to be coordinated with 1016414-00-D and| 1012215-00-G
5 – BRIGHT MOULDING – SILL RIGHT – PLASTIC
1025042-00-G
Needs to be coordinated with 1016412-00-D and 1012217-00-G
6 – SCUFF PLATE – PLASTIC – LEFT HAND
1012215-00-G
Needs to be coordinated with 1016414-00-D and 1024575-00-G
6 – SCUFF PLATE – PLASTIC – RIGHT HAND
1012217-00-G
Needs to be coordinated with 1016412-00-D and 1025042-00-G
7 – MOLDING SILL ROCKER BRACKET LEFT HAND FRONT
1003692-00-C
OK to use B or newer.
7 – MOLDING SILL ROCKER BRACKET RIGHT HAND FRONT
1003693-00-C
OK to use B or newer.
8 – BRACKET – ROCKER SUPPORT REAR
1003691-00-B
OK to use A or newer.
9 – SCREW ST WASHER M6X20 ZNAL
1006539-00-A
10 – JACKING PAD
1009124-00-C S
11 – BOLT HF M8X1.25X20 [10.9]
2007113
Order in quantities of 100; minimum order: 100.
12 – FAIRING WHEEL REAR LEFT HAND
1058757-00-A
12 – FAIRING WHEEL REAR RIGHT HAND
1058758-00-A
13 – SCREW HEX HEAD M6X20 ZNAL
1010261-00-A
Order in quantities of 50; minimum order: 50.
14 – BOLT AND WASHER – M6X12 – STEEL[8.8] – PC – ZNFL
1060685-00-B
15 – EDGE CLIP,7.5×24,GR1.7-2.1,STL,G0109
1011978-00-A
use to install molding sills. Order in quantities of 50; minimum order: 50.
16 – TAPE – DOUBLE SIDED ADHESIVE – SCUFF PLATE
1017616-00-A
use to install molding sills